Product Thumbnail

Model 809 Hammer Union Pressure Transmitter

mv/V output, 2" 1502 Fitting

Product Thumbnail

809 is the version of 09 series with no signal conditioner. A variety of sensor materials and electrical connections are available.


Request a Quote

Features

High Accuracy
1502 Hammer Union Pressure Fitting
High Pressure Applications



PERFORMANCE
Full Scale Pressure Range
0-5K, 10K, 15K, 20K PSIG (0-345, 689, 1034, 1379 bar)
Combined Accuracy (BFSL)
(Non-Linearity, Hysteresis & Repeatability) ≤± 0.25% FSO
Full Scale Output (FSO)
30 mVC ±1% FSO at 10 V excitation
Zero Balance
0 Vdc ±1% FSO
Long-Term Stability
≤±0.25% FSO per 6 months
Response Time
≤2.5 mSec to reach 90% of FSO
Compensated Temperature
-20°F to 185°F (-29°C to 85°C)
Operating Temperature
-40°F to 250°F (-40°C to 121°C)
Storage Temperature Limits
-67°F to 302°F (-55°C to 150°C)
Temperature Effect on Zero
≤±1% FSO per 100°F (37°C)
Temperature Effect on Span
≤±1% FSO per 100°F (37°C)
ELECTRICAL
Supply Voltage
10 Vdc nominal (15 Vdc max)
Power Supply Regulation Effect (Calibrated at 12 Vdc)
Output varies with input (calibrated at 10 Vdc)
Output Signal
3 mV/Volt at 70°F (21°C)
Current Draw
1 mA at 10 Vdc nominal
Load Impedance
350,000 Ohms minimum for <0.1% FSO attenuation
Range Calibration Signal
100% of FSPR
Calibration Power
Short pins E & F
Calibration Signal Accuracy
≤±0.2% FSO. The exact signal to pressure correlation is provided with each unit
Circuit Protection
Varistor protected across the input leads for surges above 34V to 20a. @ 0.02 milliseconds
Bridge Resistance
10K Ohms nominal
Insulation Resistance
≥100 MegOhms to case ground
Electrical Connection
Mates with Bendix P/N PT06E-10-6S or equivalent
PIN OUTS
PIN A +Power
PIN B -Power
PIN C +Signal
PIN D -Signal
PIN E Calibration
PIN F Calibration
NOTE:
Some models are provided with customer specified wiring. Consult Viatran for exact wiring connections.
MECHANICAL
Pressure Connection
Male hammer union 2 inch #1502
Pressure Cavity Volume
0.4 cubic inches
Proof Pressure
1.67 times the FS or 22.5K PSI (1550 bar) for union #1502
30K PSI (2068 bar) for union #2002 whichever is less
Burst Pressure
≥3 times FSPR, limited by union #1502: 22.5K PSI (1550 bar)
MATERIALS OF CONSTRUCTION
Enclosure Materials
304 stainless steel
Wetted Materials
Inconel X-750, heat treated per MR0175-2000
Shock Limitation
100 G’s
Weight
5.5 lbs nominal (2.4 kg)
Identification
Laser etched onto body
Enclosure Classification
NEMA 4X
OPTIONS
DH
Special range
EA
Special calibration run
NJ
CE label
TP
Low cavity volume sensor design
ZQ
CG379-C-145-2P (Glenair) electrical connector
ZT
REC-M-10TP-N-04-16 (Jupiter) connector

Model 809 Hammer Union Pressure Transmitter

Product Thumbnail

Model 809 Hammer Union Pressure Transmitter

mv/V output, 2" 1502 Fitting

809 is the version of 09 series with no signal conditioner. A variety of sensor materials and electrical connections are available.


Request a Quote

PERFORMANCE
Full Scale Pressure Range
0-5K, 10K, 15K, 20K PSIG (0-345, 689, 1034, 1379 bar)
Combined Accuracy (BFSL)
(Non-Linearity, Hysteresis & Repeatability) ≤± 0.25% FSO
Full Scale Output (FSO)
30 mVC ±1% FSO at 10 V excitation
Zero Balance
0 Vdc ±1% FSO
Long-Term Stability
≤±0.25% FSO per 6 months
Response Time
≤2.5 mSec to reach 90% of FSO
Compensated Temperature
-20°F to 185°F (-29°C to 85°C)
Operating Temperature
-40°F to 250°F (-40°C to 121°C)
Storage Temperature Limits
-67°F to 302°F (-55°C to 150°C)
Temperature Effect on Zero
≤±1% FSO per 100°F (37°C)
Temperature Effect on Span
≤±1% FSO per 100°F (37°C)

ELECTRICAL
Supply Voltage
10 Vdc nominal (15 Vdc max)
Power Supply Regulation Effect (Calibrated at 12 Vdc)
Output varies with input (calibrated at 10 Vdc)
Output Signal
3 mV/Volt at 70°F (21°C)
Current Draw
1 mA at 10 Vdc nominal
Load Impedance
350,000 Ohms minimum for <0.1% FSO attenuation
Range Calibration Signal
100% of FSPR
Calibration Power
Short pins E & F
Calibration Signal Accuracy
≤±0.2% FSO. The exact signal to pressure correlation is provided with each unit
Circuit Protection
Varistor protected across the input leads for surges above 34V to 20a. @ 0.02 milliseconds
Bridge Resistance
10K Ohms nominal
Insulation Resistance
≥100 MegOhms to case ground
Electrical Connection
Mates with Bendix P/N PT06E-10-6S or equivalent
PIN OUTS
PIN A +Power
PIN B -Power
PIN C +Signal
PIN D -Signal
PIN E Calibration
PIN F Calibration
NOTE:
Some models are provided with customer specified wiring. Consult Viatran for exact wiring connections.

Model 809 Hammer Union Pressure Transmitter

High Accuracy
1502 Hammer Union Pressure Fitting
High Pressure Applications

MECHANICAL
Pressure Connection
Male hammer union 2 inch #1502
Pressure Cavity Volume
0.4 cubic inches
Proof Pressure
1.67 times the FS or 22.5K PSI (1550 bar) for union #1502
30K PSI (2068 bar) for union #2002 whichever is less
Burst Pressure
≥3 times FSPR, limited by union #1502: 22.5K PSI (1550 bar)

MATERIALS OF CONSTRUCTION
Enclosure Materials
304 stainless steel
Wetted Materials
Inconel X-750, heat treated per MR0175-2000
Shock Limitation
100 G’s
Weight
5.5 lbs nominal (2.4 kg)
Identification
Laser etched onto body
Enclosure Classification
NEMA 4X

OPTIONS
DH
Special range
EA
Special calibration run
NJ
CE label
TP
Low cavity volume sensor design
ZQ
CG379-C-145-2P (Glenair) electrical connector
ZT
REC-M-10TP-N-04-16 (Jupiter) connector

Model 809 Hammer Union Pressure Transmitter


By clicking "Accept" or continuing to use our site, you acknowledge that you accept our Privacy Policy and Terms of Use. We also use first and third-party cookies to enhance site navigation, analyze site usage, and assist our marketing efforts in accordance with our Privacy Policy.